AVR

Audio bleed from one channel to the next
Some users have reported hearing two speaker channels outputting the same audio, despite being wired correctly. First thing to check is that the speaker...
Tue, 9 Jan, 2018 at 10:19 AM
Error 1 DC
This error is generally as a result of the amp seeing DC current from the speakers and going into protection mode to protect itself. This is generally due t...
Fri, 23 Mar, 2018 at 11:57 AM
Arcam AVR Firmware update - "Please wait" screen whilst firmware update
The firmware update process for AVRs consists of loading unzipped files onto a USB key (obtained from the Arcam website), inserting the USB key into the ba...
Thu, 24 Jan, 2019 at 10:00 AM
IP Driver turns device off, but not on again
Arcam AVRs by default go to low power mode when turned off due to environmental regulations. This will also turn off IP and HDMI ports. To enable IP con...
Fri, 1 Feb, 2019 at 1:35 PM