The rotating switch controls the functionality of the Downscaler. To set a particular mode:
1)Power OFF the Downscaler.
2)Using a small flat head screwdriver, turn the arrow to the desired mode number.
3)Power ON the Downscaler.
|0||Used saved EDID after copying from a TV using mode 1.|
|1||Copy EDID from a TV and save it. Switch to 0 after saving EDID.|
|2||Use EDID profile 4K, HDR, 8 Channel Audio*1|
|3||Use EDID profile 4K, HDR, 6 Channel Audio|
|4||Use EDID profile 4K, HDR, 2 Channel Audio|
|5||Use EDID profile 4K, No HDR, 8 Channel Audio*1|
|6||Use EDID profile 4K, No HDR, 6 Channel Audio|
|7||Use EDID profile 4K, No HDR, 2 Channel Audio|
Use F to pass through full 4K and duplicate audio.
*1Optical Audio will not output if audio has more than 6 channels.
A,B,C,D,E,F setting is not currently used